Allied Systems H4A Operating Manual page 11

• Wire rope and tail chain will fail if worn-out,
overloaded, misused, damaged, improperly
maintained or abused. Wire rope or tail chain failure
may cause serious injury or death!
• Do not terminate wire rope to tail chain by the use
of a knot.
• Do not handle wire rope if the hook end is not free.
A load could break away, suddenly tensioning the
wire rope, resulting in serious injury or death.
• Stay clear of wire rope entry areas (fairlead or arch
rollers, winch drum etc).
• Make sure that ground personnel are in plain view of
the operator, and at a distance of at least 1½ times
the working length of the wire rope.
• Make sure that any hand signals used by ground
personnel are clearly defi ned and understood by
KG
everyone involved.
• Do not attempt to "jerk" or "shock" a load free. Doing
so can cause loads in excess of the rated capacity
of the wire rope, winch, or mounting hardware.
• Replace any parts only with genuine Allied Winch
KG
parts. Refer to parts manual 599015W.
• Maintain a minimum of three (3) complete wraps
of wire rope on the drum for normal operation. It
may help to paint the last fi ve (5) wraps of wire rope
a contrasting color, to serve as a visual indicator.
• Do not handle wire rope with bare hands. Wear
leather gloves at all times.
Safety Summary
ix