Schwinn 190 Service Manual page 97

14. Re-install the Pedals (if removed). Start the Pedals by
hand, and then fully tighten them with the Pedal Wrench or
15 mm wrench. The Pedals must be fully tightened.
If the threads strip due to improper installation, then the
Pedals can disengage from the bike and/or break while under
usage, which can result in serious injury to the user.
Note: The Left Pedal is reverse-threaded. Be sure to attach
Pedals on the correct side of the Bike. Orientation
is based from a seated position on the bike. The
15. Final Inspection
Inspect your machine to ensure that all hardware is tight and
components are properly assembled.
Do not use until the machine has been fully assembled and
inspected for correct performance in accordance with the
Owner's Manual.
(R)
97
(L)