EUFY RoboVac G20 Hybrid Quick Start Manual

Hide thumbs Also See for RoboVac G20 Hybrid:

T2258 51005003082 V01

Quick Start Guide

Using Your RoboVac

OFF

- Always keep the Charging Base plugged in, otherwise

RoboVac will not automatically return.

- When the Charging Base is connected to AC power, the

LED indicator on the Charging Base is SOLID WHITE.

Download the EufyHome app and follow

the in-app instructions to complete the

Wi-Fi connection. You then will be able to

control RoboVac via this app. Refer to the

Owner's Manual for details.

Remove the sticker next

to the power switch, and

the foam blocks beside the

bumper before use.

If you cannot remove the

objects surrounding the

Charging Base, check

whether RoboVac can

return without assistance; if

not, contact eufy customer

service for help.

Fully charge RoboVac before use. The

LED indicator on RoboVac pulses

orange while charging, and is solid

blue when fully charged.

EufyHome

Table of Contents

Do you have a question about the RoboVac G20 Hybrid and is the answer not in the manual?

Page 1 Charging Base, check whether RoboVac can return without assistance; if not, contact eufy customer service for help. - Always keep the Charging Base plugged in, otherwise RoboVac will not automatically return. - When the Charging Base is connected to AC power, the LED indicator on the Charging Base is SOLID WHITE.
Page 2 Using Mopping System Important Tips When using for the first time, follow RoboVac to observe and resolve any problems that may occur. Attach the waterproof pad to the charging base. Wet the cloth before mopping. Remove power cords and small objects from the floor that may entangle RoboVac. Use the Clean and Maintenance supplied cable ties to organize your wires and power cords.