Table Of User-Selectable Features - Clifford intelliguard 900-IQ Owner's Manual

Feature Select
Row 1
1st momentary
Row 2
2nd momentary
Row 3
3rd momentary
Row 4
4th momentary
Row 5
5th momentary
Row 6
6th momentary
WARNING:
If you have remote window and sunroof closure, DO NOT CHANGE THIS SETTING: it requires installer-only adjustment. Changing the duration may cause damage.
Please Note: There is a column 6 that contains installer-only features; do not change any of these settings. If you accidentally select column 6, turn off the ignition.
Transmit channel 1 (or other channel of your choosing) of the new
NOTE 1:
remote control. You will hear one chirp to confirm programming of channel 1.
Transmit channel 2 (or other channel of your choosing) of the new
NOTE 2:
remote control. You will hear two chirps to confirm programming of channel 2.
Transmit channel 3 (or other channel of your choosing) of the new
NOTE 3:
remote control. You will hear three chirps to confirm programming of channel
3.
Transmit channel 4 (or other channel of your choosing) of the new
NOTE 4:
remote control. You will hear four chirps to confirm programming of channel 4.
Transmit channel 5 (or other channel of your choosing) of the new
NOTE 5:
remote control. You will hear five chirps to confirm programming of channel 5.
When you hear one chirp, all remotes will have been erased from the
NOTE 6:
system memory. You must now add the new and/or existing remote controls to
the system (i.e., program channels 1–5 of each remote that will be used with
your IntelliGuard 900IQ).
Immediately flip the switch to its latched position, then:
NOTE 7:
Table of user-selectable features: 1 chirp = OFF, two chirps = ON.
Column 1 Column 2
1st latched 2nd latched
Sound 1: on/off Add new remote to channel 1
info on page 20 info on page 12 NOTE 1
Sound 2: on/off Add new remote to channel 2
info on page 20 info on page 12 NOTE 2
Sound 3: on/off Add new remote to channel 3
info on page 20 info on page 12 NOTE 3
Sound 4: on/off Add new remote to channel 4
info on page 20 info on page 12 NOTE 4
Sound 5: on/off Add new remote to channel 5
info on page 20 info on page 12 NOTE 5
Sound 6: on/off Erase all channels
info on page 20 info on page 23 NOTE 6
24
Column 3
3rd latched
AutoLock on/off Enhanced AutoArming: on/off
info on page 16
RPM-activated AutoLock on/off AutoArm & Lock: on/off
info on page 16
AutoUnLock on/off 15-second entry delay: on/off
info on page 16
AutoActivate timed accessory
QuietChirps: on/off
upon remote arming: on/off
info on page 20
this feature is for installers only
SilentNight: on/off Siren duration: 60/30 seconds
info on page 20 (1/2 chirps) info on page 20
Long-term
chirp silencing: on/off disarming/valet code
info on page 20 info on page 10 NOTE 7
a. Enter the new code that you wish to use. The system will sound the same
number of chirps as the digit you choose when you move the switch to the
latched side (e.g., if the first digit is 4, you'll hear four chirps when you press
the latched side).
b. Make sure to return the switch to its center position when complete.
c. Wait 3 seconds until you hear 2 chirps, indicating the new code has been
accepted.
d. Turn the ignition off. You'll hear 3 chirps to confirm program mode exit and
the LED will turn off.
e. VERY IMPORTANT: You must immediately test your new secret
disarming/valet code: Turn the ignition on, enter your new code, then flip the
switch to its latched position. The LED will illuminate. If it does not, the new
code you programmed and the one you just entered do not match. The system
has reverted to the previous code.
The headlight duration timer starts as soon as you select this feature.
NOTE 8:
When the duration you wish has been reached, press button 1 on the remote
control. You will hear two chirps to confirm the new duration.
© Copyright Clifford Electronics, Inc., 1994
Column 4 Column 5
4th latched 5th latched
NightVision on/off
info on page 15 info on page 18
Post-parking headlight duration
1sec -2min (30sec)
info on page 15
info on page 12 and 18 NOTE 8
FACT: on/off
info on page 15 info on page 16
Set channel 4 and 5 timer
1sec -2min (30sec)
info on page 12 NOTE 9
Anti-carjacking: on/off
info on pages 9-10
Set a new secret Remote control button sequence
to override anti-carjacking
info on page 10 NOTE 10
25
31-713A/IG9OM/494