User-Selectable Features; Programming Table For User-Selectable Features - Clifford Falcon II Owner's Manual

Clifford owner's manual world-class auto security falcon ii

Hide thumbs

Table Of Contents

Table of Contents

Your Falcon II vehicle security system allows you to set many of its features to your

own personal preferences. We have made the programming procedures very simple:

to make a change, you just flick the valet switch a few times. The system comes

from the factory with all of its features pre-programmed as noted in the table below

and on the next page. To change any of the settings, use the following procedure. To

restore the feature to its factory setting, just repeat the procedure:

1. Select the feature you wish to program from the table below and on page 14.

Note the number of "flicks and chirps" associated with that feature.

2. Turn the ignition on, then immediately flick the valet switch back and forth,

counting the number of chirps you hear. Stop when you reach the number of

flicks and chirps associated with that feature.

3. If noted, immediately perform the "secondary action."

4. Wait for the program completion confirmation (1-5 chirps), then turn the

ignition off.

5. Repeat steps 1-4 for any other features you wish to program.

Programming table for user-selectable features

# of

Factory

Feature

flicks and

setting

chirps

AutoArming

AutoArm &

OFF

Lock

Arm/disarm

chirps

AutoLock/

AutoUnLock

False Alarm

Control and

Test

Add a New

Remote to

—

Channel 1

(arm/disarm)

Add a New

Remote to

Channel 2

—

(optional

smart boot

release)