Clifford intelliguard 900-IQ Owner's Manual page 8

Standard Features of the IntelliGuard 9OO-
—The IntelliGuard 900-IQ's memory stores the identity of the
Eight-Event TotalRecall™
last eight triggers and/or sensors activated. This provides an invaluable diagnostic means,
since, whenever you wish, the system will visually identify the activated triggers and
sensors in reverse chronological order.
Patented Smart Prior Intrusion Attempt Alert
chirp and parking light flash sequence will audibly and visually alert you from a distance
if an intrusion attempt was foiled while you were away. IntelliGuard 900-IQ systems even
identify the specific trigger or sensor that detected the intrusion attempt.
Remote Window/Sunroof Closure Capability
integrated timer and an optional relay can be used to automatically close the power
windows and sunroof every time you remotely arm your system.
Smart Remote Trunk Release Capability
optional remote trunk release can be activated only when the system is disarmed. To
further prevent any possibility of unintentional opening of the trunk, the interlock also
makes sure that the trunk release cannot be remotely activated while driving.
Advanced CMOS Microcomputer
commands all system functions more than 1,000,000 times per second, yet it draws less
power than the vehicle's clock, so it won't deplete your car battery like other alarms.
Patented Remote Control Code Learning
to the system up to 4 different 12-channel Clifford remote controls. Just as easily, a lost or
stolen remote control can be deleted from the system memory.
High-Luminescence LED Status Indicator with Automatic Battery-Saving Mode
Adds visual deterrence and identifies system status. To conserve vehicle battery power, if
the system has remained continuously armed for 48 hours, the flash rate will
automatically slow to half the normal rate. If left continuously armed for 96 hours, the
blink rate will slow to one-quarter the normal rate.
Control Unit with 5 Channels
Multiple Sensor/Trigger Inputs
inputs for the doors, trunk and hood allow for a higher level of security and precise
trigger/sensor identification.
Patented SmartPowerUp™ II
non-volatile memory always remembers the last state (armed, disarmed or valet mode)
and returns to that state when power is restored. So if a thief disconnects the power and
then restores it in an attempt to start the car, the system will re-arm and instantly sound the
siren while immobilizing the vehicle.
Full-Time Programming Access
user-selectable features at any time, even while driving. Clear, audible signals confirm
each feature selection and setting.
— When you remotely disarm, a special
— On certain vehicles, the system's
— An electronic interlock assures that the
—Very large scale integration (VLSI) microprocessor
— Just a few flicks of a switch lets you match
— For remote system operation and accessories.
— Separate inputs for two sensors as well as separate
— When power to the system is disconnected, the system's
— You can easily change the status of more than 30
7
IQ
(cont.)
—