Table Of User-Selectable Features - Clifford intelliguard 700-IQ Owner's Manual

Feature Select
Row 1
1st momentary
Row 2
2nd momentary
Row 3
3rd momentary
Row 4
4th momentary
Row 5
5th momentary
Row 6
6th momentary
Please Note: There is a column 5 that contains installer-only features; do not change any of these settings. If you accidentally select column 5, turn off the ignition.
Transmit channel 1 (or other channel of your choosing) of the new
NOTE 1:
remote control. You will hear one chirp to confirm programming of channel 1.
Transmit channel 2 (or other channel of your choosing) of the new
NOTE 2:
remote control. You will hear two chirps to confirm programming of channel 2.
Transmit channel 3 (or other channel of your choosing) of the new
NOTE 3:
remote control. You will hear three chirps to confirm programming of channel 3.
Transmit channel 4 (or other channel of your choosing) of the new
NOTE 4:
remote control. You will hear four chirps to confirm programming of channel 4.
When you hear one chirp, all remotes will have been erased from the
NOTE 5:
system memory. You must now add the new and/or existing remote controls to
the system (i.e., program channels 1–4 of each remote that will be used with
your IntelliGuard 700-IQ).
The headlight timer starts as soon as you select this feature. When the
NOTE 6:
duration you wish has been reached, press button 1 on the remote control. You
will hear two chirps to confirm the new headlight timer duration.
Table of user-selectable features: 1 chirp = OFF, two chirps = ON.
Column 1
1st latched
Sound 1: on/off Add new remote to channel 1
info on page 18 info on page 10 NOTE 1
Sound 2: on/off Add new remote to channel 2
info on page 18 info on page 10 NOTE 2
Sound 3: on/off Add new remote to channel 3
info on page 18 info on page 10 NOTE 3
Sound 4: on/off Add new remote to channel 4
info on page 18 info on page 10 NOTE 4
Sound 5: on/off
info on page 18 info on page 22 NOTE 5
Sound 6: on/off Headlight Reminder: on/off
info on page 18
DO NOT CHANGE THIS SETTING: it requires installer-only adjustment. Changing the duration may cause damage.
23
for IG700IQ owners
Column 2
2nd latched
AutoActivate timed accessory
upon remote arming: on/off
this feature is for installers only
Erase all channels
Long-term chirp silencing: on/off
info on page 16
Immediately flip the switch to its latched position, then:
NOTE 7:
a. Enter the new code you wish to use. The system will sound the same number of
chirps as the digit you choose when you move the switch to the latched side (e.g.,
if the first digit is 4, you'll hear four chirps when you press the latched side).
b. Make sure to return the switch to its center position when complete.
c. Wait 3 seconds until you hear 2 chirps, indicating the new code has been
accepted.
d. Turn the ignition off. You'll hear 3 chirps to confirm program mode exit and
the LED will turn off.
e. VERY IMPORTANT: You must immediately test your new secret valet
code: Turn the ignition on, enter your new code, then flip the switch to its
latched position. The LED will illuminate. If it does not, the new code you
programmed and the one you just entered do not match. The system has
reverted to the previous code.
© Copyright Clifford Electronics, Inc., 1995
Column 3
3rd latched
AutoLock on/off
info on page 16
AutoUnLock on/off
info on page 16
FACT: on/off 15-second entry delay: on/off
info on page 15
QuietChirps: on/off Siren duration: 60/30 seconds
info on page 18 (1/2 chirps) info on page 18
Set a new secret valet code
info on page 18 info on page 14 NOTE 7
WARNING:
If you have remote window and sunroof closure,
24
Column 4
4th latched
AutoArming: on/off
info on page 12
AutoArm & Lock: on/off
info on page 12
info on page 11
Set headlight duration
1sec - 2min (30sec)
info on page 10 NOTE 6
31-711B/IG7OM/1195