Siren Duration; Smart Trunk Release Option; Smartpowerup™ Ii - Clifford intelliguard 700-IQ Owner's Manual

Remote controlled chirp muting:
especially valuable when parking late at night in a quiet residential area or any
other time when you want to arm or disarm silently. To arm or disarm silently,
simply press button 3 (channel 3) on your remote control instead of the usual button
1 (channel 1).
When the system detects an intrusion attempt, the alarm is set to

Siren duration:

sound for 30 seconds. However, if you prefer, you may change it to 60 seconds.
See the User-selectable features section on pages 20-24.

Smart trunk release option

If the remote trunk release feature was installed, you may use the remote control's
button 2 to remotely pop the trunk. Your IntelliGuard 700-IQ has a built-in electronic
interlock to prevent unintentional activation of the remote trunk release when you drive,
or when the system is armed.
SmartPowerUp™ II
If power to the system is ever removed, SmartPowerUp II ensures the system will
automatically restore itself to its previous state when power is restored. So if a thief
disconnects the power and then restores it in an attempt to start the car, the system will
re-arm and instantly sound the siren while immobilizing the vehicle. If your vehicle is to
be serviced by a mechanic, just put the system in valet mode via the remote control (see
Remote controlled valet mode entry and exit on page 14). If the mechanic needs to
interrupt power, your system will automatically return to its valet mode state when
power is restored; there will be no alarm activation and no need to provide your
mechanic with your remote control and instructions on how to use it.
Remote controlled chirp muting capabilities are
19