Using Pyko-In With Audio Manager; Pyko-In In 'Stand-Alone' Mode - Digigram PYKO-in User Manual

Using PYKO-in with Audio Manager

If you use your PYKOs with Audio Manager, you will first have to either assign an IP address through the web
pages or turn the DHCP on (Audio Manager will then automatically assign an IP address). Audio Manager
Server will detect this address and allow the Audio Manager Client to configure it.
To be detected by Audio Manager, the TCP control port has to be set to "40002", the UDP listening port to
"40004". These are also the values defined in the factory configuration.
Nonetheless, you may decide that Audio Manager is to control PYKO-in only in part. In this case, use the
PYKO-in html pages to configure the device accordingly (cf. on-line help of the pages).
For more details on managing PYKO through Audio Manager, please refer to its on line help.

PYKO-in in 'stand-alone' mode

•
Select the application firmware that best meets your requirements (see above).
•
You can now visualize the Web pages that enable you to parameterize the device.
10