H3C MSR2600-10-X1 Quick Start Manual

H3C MSR2600-10-X1 Gigabit Ethernet Integrated Service Gateway Installation Quick Start-6PW101
H3C MSR2600-10-X1
Tool list
The installation tools are not provided with the device. Prepare them yourself.
设备不随机提供安装工具，请用户根据实际安装需求自己准备安装工具。
Flathead screwdriver Phillips screwdriver
一字螺丝刀 十字螺丝刀
Diagonal pliers Blow dryer
斜口钳 热吹风
Introduction to installation accessories
Grounding cable
2600-10-X1 bail latch (provided )
(provided)
2600-10-X1电源线卡钩(标配)
地线(标配)
2600-10-X1 mounting brackets (provided)
Rubber feet
脚垫
2600-10-X1 挂耳(标配)
Wear an ESD wrist strap, and make sure the wrist strap makes good skin contact and
!
is reliably grounded.
操作者需佩戴防静电腕带，确保防静电腕带与皮肤良好接触，并确认防静电腕带已经良
好接地。
Needle-nose pliers Wire-stripping pliers
尖嘴钳 剥线钳
ESD wrist strap Marker
防静电腕带 记号笔
Cage nut
(user-supplied)
浮动螺母(用户自备)
M4 screw
(provided)
M4 螺钉(标配)
-6PW101
Airflow design of the device
Make sure the air inlet and outlet vents are not blocked and the installation site has a good
ventilation system.
请确保设备的进、出风孔不被遮挡，并将设备安装在具有良好通风散热系统的环境中。
Mounting the device on a workbench
Mount the device on a workbench.
将设备安装到工作台
BOM:3104A0JQ
The MSR2600-10-X1 uses left-to-
right aisles.
MSR2600-10-X1采用左进右出的
风道设计
Stick the rubber feet to the appropriate
positions on the device bottom.
粘贴胶垫到设备底部