Interbay Patch Arrangement - ADC Cross-Connect DSX-1 Operational Procedures Manual

(IF PRESENT)
-48V
-48V
TL
RET
SG
WIREWRAP
OR
COAXIAL
DIGITAL
OUT
TRANSMIT
SWITCH
IN RECEIVE
(IF PRESENT)
(IF PRESENT)
BLUE-WHITE
ORANGE-WHITE
LEDs ASSOCIATED WITH
EACH MULTIPLIED
JACK LOCATION
IN OUT
TO LEFT
L R
SIDE MULTIPLE
OUT
BAY 3
Without exception, always patch OUT to IN and IN to OUT at every location, whether using single-ended or dual-ended plugs.
When a patch is made from the left to right direction, the right side of the jack appearance selected must be used. The other
end of the patch must use the left side of the jack appearance selected. The reverse is true if patch is made from right to left direction.
Note: In this example, the LEDs in Bay 7 and 11 for Circuit 3 will be lit, indicating the jack is in use.
TRACER LED TRACER LED
IC
MON MON
OUT OUT
OUT OUT
IN IN
MON MON
IN IN
(IF PRESENT)
GREEN
TL TL
BLUE OUT OUT
T T
BLUE-WHITE
R R
ORANGE IN IN ORANGE
T T
ORANGE-WHITE
R R
INTERBAY CIRCUIT3
IN OUT
L R L
IN OUT IN
7 11

INTERBAY PATCH ARRANGEMENT

ADCP-80-514 • Issue 1 • January 1999
(IF PRESENT)
-48V
-48V
TL
IC
RET
SG
WIREWRAP
OR
COAXIAL
OUT
TRANSMIT
REPEATER
RECEIVE IN
(IF PRESENT)
GREEN
BLUE
IN OUT
TO RIGHT
R L R
SIDE MULTIPLE
OUT IN
15
11891-B
© 1999, ADC Telecommunications, Inc.
OFFICE
BAY
Page 12