Rack Mounting - ADC HRE-425 List 1 Quick Installation

Rack Mounting

The HRE-425 can be mounted into a 19- or 23-inch relay rack with one of the two rack
mounting brackets that are provided in the installation kit.
Harmonic connector
mounting holes
Side View
Hinge Down
Bracket
mounting holes
Side View
Harmonic connector
mounting holes
1 Orient the mounting brackets to the side panels consistent with the rack size (19- or
23-inch).
2 Attach the rack mounting brackets to the bracket mounting holes
side panel with the four bracket attaching screws and locking nuts.
3 Attach the HRE-425 to the rack with the four mounting screws included.
Hinge Up
Top
Figure 2. Wall Mounting and Hinging View
Top
Bracket
mounting holes
Backplate
H0329-A
Hinge
mounting
bolt
Mounting hinge
bolt (remove)
Mounting
hinge
bolt
(Figure 2) on each