Download Print this page
Sanus Systems PLATINUM FURNITURE PFPL Assembly Instructions Manual

Sanus Systems PLATINUM FURNITURE PFPL Assembly Instructions Manual

Digital tv stand

Advertisement

Quick Links

PLATINUM FURNITURE
MODEL PFPL
Assembly Instructions
Congratulations and thank you for purchasing your new Sanus
Platinum Furniture Product. If you have any questions regarding
this or any other Sanus product, please contact our customer
service department at (800)359-5520, or www.sanus.com. It is
not necessary to contact the retailer with any questions or
problems, as parts can be sent directly to you
Please follow these assembly instructions. This will save you
time, make assembly easier and prevent possible damage to
your new Digital TV Stand. Assistance may be required for
some assembly procedures. Correct assembly is your
responsibility.
All manuals and user guides at all-guides.com
-
Digital TV Stand
We recommend that the unit is assembled on a soft surface
such as carpet. Please record your serial number in the space
provided below and retain this manual for future reference.
Serial No
This unit was manufactured using ISO 9000 certified systems.
For improvement purposes, design and specifications are subject to
change without notice.
BUS5305

Advertisement

loading
Need help?

Need help?

Do you have a question about the PLATINUM FURNITURE PFPL and is the answer not in the manual?

Questions and answers

Summary of Contents for Sanus Systems PLATINUM FURNITURE PFPL

  • Page 1 All manuals and user guides at all-guides.com PLATINUM FURNITURE Digital TV Stand MODEL PFPL Assembly Instructions BUS5305 Congratulations and thank you for purchasing your new Sanus We recommend that the unit is assembled on a soft surface Platinum Furniture Product. If you have any questions regarding such as carpet.
  • Page 2 All manuals and user guides at all-guides.com...
  • Page 3 All manuals and user guides at all-guides.com CAUTION There are many small components used in the construction of this unit. These loose items should be kept away from young children while assembling your unit. Shelf Pin Barrel nut P860121 x 1 P860035 x 6 P840048 x 8 P840050 x 8...
  • Page 4 All manuals and user guides at all-guides.com Insert wooden dowels into sides as shown. 1. Fasten 8 Connector Rods into small holes in Top as shown.
  • Page 5 All manuals and user guides at all-guides.com Intersecting hole Important: *When fitting the rails onto the top, ensure that the grooved part of the rails are closest to the side edges of the top. * The larger holes (cam holes) in the rails must always be closest to the Top.
  • Page 6 All manuals and user guides at all-guides.com...
  • Page 7 All manuals and user guides at all-guides.com...
  • Page 8 All manuals and user guides at all-guides.com...
  • Page 9 All manuals and user guides at all-guides.com...
  • Page 10 All manuals and user guides at all-guides.com...
  • Page 11 All manuals and user guides at all-guides.com...
  • Page 12 All manuals and user guides at all-guides.com Locking screw x8 Base 1. With assistance align Base onto Dowels in Sides & Rails & then press fit. 2. Fasten large Locking screws through Base into Sides & Rails ( Screw heads should be flush with surface).
  • Page 13 All manuals and user guides at all-guides.com Following steps apply to both flat and curved front designs. Glide x6 Screw x6 1. Fasten the glides to the base as shown.
  • Page 14 All manuals and user guides at all-guides.com Adjusting screw x 4 1. Turn unit over carefully. 2. Screw each Adjusting screw into Side by half of it's visible threaded length, then once this is done, tighten all 4 Adjusting screws fully into Side.
  • Page 15 All manuals and user guides at all-guides.com Flat edge of the glass Curved edge of the glass shelves must be placed at shelves must be placed at front front for the flat front design . for curved front design . Glass shelf Glass shelf Shelf Pin x8...
  • Page 16 All manuals and user guides at all-guides.com 1. Press fit 2 Cable Ducts into large holes in the Base. 2. You have now completed the assembly of your new Digital TV stand. NOTE: We recommend that all contents stored in or on this item of furniture be removed before shifting it. The manufacturers will not be held liable for damage caused when furniture is shifted without first removing its contents.