Sanus Systems T20/20 Assembly Instructions

Assembly Instructions for Sanus Systems T20/20
Thank you for choosing Sanus Systems furniture. Sanus Systems turntables are functional, beautiful, and economical. The
textured black painted fi nish is both durable and attractive. The T20/20 is designed to swivel up to a 20" television. Please
check carefully to make sure there are no missing or defective parts. Never use defective parts. Improper assembly may
cause damage or serious injury. If you have any questions regarding this product, contact Sanus at 800.359.5520 or visit
www.sanus.com. Our customer service representatives can quickly assist you with missing or damaged parts. Replacement
parts for Sanus products purchased through authorized dealers can be shipped directly to you. Please call Sanus Systems
before returning products to the point of purchase.
Required Tools: Philips screw driver, hammer

Supplied Parts:

(1) Base Shelf - a (2) Support Pillar - b
(4) Plastic Dowel - c (4) Base Bolt - d
(1) Top Shelf - e
Diagram 1
a
To use the T20/20 as just a television swivel, follow the
instructions in the note below. To use the complete as-
sembly, skip ahead to Step 1.
NOTE: For use without the component storage remove
the plastic swivel from under the Base Shelf (a). This is
done by removing the Philips head screw in the center.
Next, reattach the plastic swivel to the pilot hole on the
Philips Head Screw
bottom side of the Top Shelf (e).
Sanus Systems 2221 Hwy 36 West, Saint Paul, MN 55113 6.06.04
Customer Service: 800.359.5520. See complimentary Sanus products at www.sanus.com