Assembling And Removing The Handles / Handlebar - Micro FLEX Manual

Assembling and removing the handles / handlebar

MICRO FLEX I FLEX AIR | FLEX 200 | SUSPENSION | BULLET | Monster BULLET | SPRITE | SPEED+ |
ROCKET | WHITE | BLACK | MICRO EAZY
− Assembling the handles: Insert the handles into the T-piece of the steering column. Orient the
handles so that the two locking buttons
purpose.
− Removing the handles: Push the locking buttons inwards and pull the handles out of the
T-piece of the steering column (see Fig. J).
MICRO LIGHT | SUSPENSION | CRUISER
1. Assembling the handlebar: Loosen the screws
the upper part of the fastener
2. Insert and centre the handlebar.
3. Position the upper part of the fastener over the handlebar and tighten the fastener again with
the hexagon socket key (see Fig. K).
CAUTION! The handlebar must be assembled by an adult.
audibly click into the openings provided for this
7
with a suitable hexagon socket key and set
8
aside.
9
asseMbly InstructIons
27
EN