Assembly Instructions; Unfolding And Folding The Steering Column - Micro FLEX Manual

Assembly instructions

Unfolding and folding the steering column

MICRO Light
1. Open the clamp
1
2. Pull the folding handle
position (see Fig B.).
3. Tighten the clamp again and ensure that there is sufficient tension (see Fig. C). If there is not
enough tension on the clamp, you can increase the tension by tightening the knurled screw
To do this, unfold the clamp, tighten the knurled screw and then close the clamp again.
MICRO BULLET | SPRITE | FLEX | Monster BULLET | CRUISER
1. Open the clamp
1
2. Push the button
4
into place (see Fig. E).
3. Then tighten the clamp again and ensure that there is sufficient tension. If there is not enough
tension on the clamp, you can increase the tension by tightening the knurled screw
this, unfold the clamp, tighten the knurled screw and then close the clamp again.
(see Fig. A).
forward until the clamp locks securely into place in the forward
2
(see Fig. D).
and unfold the steering column until the locking mechanism audibly clicks
asseMbly InstructIons
.
3
. To do
3
25
EN