Status - Lantronix SM12XPA User Manual

Lantronix SM12XPA Web User Guide

Status

This page displays the status of the IP protocol layer. The status is defined by the IP interfaces, the IP routes, and
the neighbor cache (ARP cache) status.
To display IP Status in the web UI:
1. Click System, IP Address, and Status.
2. View the IP Configuration information.
Figure 2-2.3: IP Status
Parameter descriptions:
IP Interfaces
Interface : Shows the name of the interface.
Type : Shows the address type of the entry. This may be LINK or IPv4.
Address : Shows the current address of the interface (of the given type).
Status : Shows the status flags of the interface (and/or address).
IP Routes
Network : Shows the destination IP network or host address of this route.
Gateway : Shows the gateway address of this route.
Status : Shows the status flags of the route.
Neighbor cache
IP Address : Shows the IP address of the entry.
Link Address : Shows the Link (MAC) address for which a binding to the IP address given exists.
Buttons
Auto-refresh : Check this box to refresh the page automatically every 3 seconds.
Refresh : Click to refresh the page immediately.
Page 24 of 473
33848 Rev. A https://www.lantronix.com