Settings Of Modes Within Econo Mode - Daikin STREAMER MC55UVM6-7 Operation Manual

If you wish to turn Monitoring mode (within ECONO MODE) OFF

Settings of Modes within ECONO MODE

Setting procedures
1.
Hold down on the unit for about 5 seconds and when a short beep sounds, press
remote controller while pressing
• This setting change can be performed when the unit is on or off.
2.
Release both buttons when a short beep sounds.
• The FAN lamp (Quiet) and ECONO MODE lamp will light up after blinking for about 5 seconds.
The ECONO MODE lamp will light up or blink depending on the ON/OFF status of Monitoring mode.
3.
Press on the unit to change the setting.
• Each press turns the ECONO MODE lamp ON or OFF.
(The FAN lamp (Quiet) will remain lit up.)
To turn Monitoring mode ON
Turn on the ECONO MODE lamp.
To turn Monitoring mode OFF
Turn off the ECONO MODE lamp.
• Setting is indicated using the ECONO MODE lamp. If the ECONO MODE lamp does not change, unplug the unit, wait at
least 5 seconds, then reinsert the power supply plug and repeat the above procedure.
4.
Press on the remote controller after making the new setting.
• A short beep sounds and the FAN lamp
lamp also blinks.
Unplug the unit while the lamp is blinking, wait at least 5 seconds, and then reinsert the power supply plug.
Setting is now complete.
• If this procedure is not performed, the unit will not return to regular operation mode.
Note
• Settings are remembered even if the unit is unplugged.
Remote controller Unit
on the unit.
(Quiet) will blink. When Monitoring mode is turned ON, the ECONO MODE
Setting at time
ON
of purchase
OFF
Advanced Settings
*Setting at time of purchase
Monitoring Monitoring
Monitoring Monitoring
ON* OFF
ON* OFF
on the
16