Xylem GEMK Installation, Operation And Maintenance Instructions page 84

en – Original Instructions
WARNING:
Use ropes, chains and/or slings (hereinafter referred to as "ropes"), hooks and/or clasps
(hereinafter referred to as "hooks"), shackles or eyebolts that comply with the applicable
directives and are suitable for use.
NOTE:
Make sure that the harnessing does not damage the pump set.
WARNING:
Lift and handle the pump set slowly to avoid stability issues.
WARNING:
During handling, make sure to avoid injury to people and animals, and/or damage to property.
Preparing the pump set for lifting
1. Remove packing materials from the product.
2. Release the pump set from the pallet by removing the screws and/or cutting the straps.
3. Install 4 shackles or 4 eyebolts at the position indicated - see the figure.
84
1. Rope
2. Eyebolt
3. Eyebolt nut
4. Shackle
1
2
3
1
4
GEMK – Fire-fighting Pump Set