TVS RAIDER Owner's Manual page 44

Note
If the phone enters battery saver mode, auto-pairing
might not happen. It takes maximum of five minutes
for auto-pairing and it can happen in vehicle running or
engine at idling or engine off condition.
Auto-pairing happens only if the application is locked in
the RAM in multitasking screen of the phone which has
customized OS (Ex : MI, Vivo etc.).
In case of Android phones with Android OS version
above 8.0, for App to work seamlessly, any battery
optimization setting to be removed in the TVS Connect
App and GPS shall be allowed to run in background in
high accuracy mode.
Even if your phone's Bluetooth is already paired to other
gadgets like smart watch, health band or helmet, the
auto-paring works with your TVS Raider's connected
instrument cluster.
If the application unfortunately stops due to unforeseen
circumstances, close and reopen the application and do
the manual pairing for the first time, then auto pairing
will happen subsequently.
For first time pairing, logout from the app, login again
with your login credential and press 'CONNECT' tab.
38
Once the connected instrument cluster of your TVS
Raider is connected with your smart phone, the
connected instrument cluster displays your mobiles
network providers signal strength '
level ' ' icon, incoming / missed call alert '
icon and SMS alert display '
Note
Incase multiple SIM cards are used in smart phone, by
default, SIM 1's network provider's signal strength is
shown in the display of connected instrument cluster.
Signal strength displayed in the connected instrument
cluster might vary from the display in smart phone as the
former is referred from telephonic standards.
' icon, battery
'
' icon.