TVS RAIDER Owner's Manual page 30

The sequence of 'Menu switch' are as follows.
To access the 'Average speed' and 'Top speed' data,
keep the display in 'Trip A or Trip B' menu and then
long press the 'Menu switch'. After accessing the
'Average speed' data, short press the 'Menu switch'
to get the 'Top speed data'.
24
Note
Above mode changes are possible only when the vehicle
is in static condition for safety. It is advised to change
modes in static condition, reset will not happen in
dynamic
Economy and power mode
There are two ride modes viz. 'ECO and POWER'
mode is available for the rider to select. To toggle
between these modes, use mode selection switch
refer page no. 21.
'ECO' mode indicates that the vehicle is running
in economy mode which will give you a better fuel
economy. Please remember that 'TVS intelliGO'
system will function only in 'ECO' Mode.