CE 99-DF, CE 99-ZF, PI 8022
• Only use steel pipe ∅
stainless steel).
• Fasten the gas line to the side or rear wall of the surrounding furniture parts so that
no loads are placed on the actuators.
1. Connect the pipes as shown (fig. 8, page 6).
2. Attach a sign above the device with the following text:
"WARNING!
When cooking, additional ventilation must be provided, for example, by
opening windows near the device.
The device must not be used as a space heater."
3. Open the gas supply.
!
WARNING! Explosion hazard
Never check for leaks with an open flame or near sources of ignition.
4. Check all connections for leaks with leak spray.
There are no leaks if no bubbles form.
5. Check that the test port of the regulator is properly closed (fig. 9, page 6).
6.4
Connecting the device to the power supply
(models with electronic ignition only)
1. Connect the device as shown (fig. 0, page 7).
2. Add a 1 A fuse in the plus line near the battery.
7
Using the device
!
WARNING! Fire hazard/ Explosion hazard
• Only use pots and pans with an even base and a diameter no larger
than the grids on the device. The pots and pans must be large
enough to cover the flame. If the flames are not covered, items of
clothing could catch fire.
• When cooking, ensure that pans and pots are firmly set down.
• Once cooking is completed, ensure that all gas control knobs are
turned to the off position. After use close the gas supply.
EN
5
3
/
x
/
in. (∅8 x 1 mm) (welded, seamless steel or
16
64
Using the device
21