Omron V640 Series Operation Manual page 36

3 V640 Utility Tool Features
Item
Network Settings(ROM)
IP Address
Subnet Mask
(3) Last Command Information
Item
Latest Communication
Command Code
Response Code
(4) Communications History Information
Item
Communication History
Total
Success
Error
(5) Hardware Information
Item
H/W Status
Memory
Antenna
3-4
Description
If the Amplifier Unit is set to use the IP address that is set in ROM,
this item is displayed in blue, and the IP address and subnet mask
of the Amplifier Unit are displayed.
Description
The last command code that was executed and the last response
code that was returned by the Amplifier Unit are displayed.
Description
History information on communications with the ID Tags is displayed
Total number of communications
Total number of successful communications
Total number of failed communications
Description
Hardware information is displayed.
Error is displayed if a memory error was detected during the memo-
ry check at startup.
Error is displayed if an error is detected in the CID Head that is con-
nected to the Amplifier Unit (or if a CID Head is not connected).
V640 SERIES CIDRW SYSTEM OPERATION MANUAL V640 Utility Tool (Z469-E1)
Comments
If the Amplifier Unit is set
to use the IP address that
is set in ROM, this item is
grayed out.
Comments
Nothing is displayed if a
command has not been
executed since the Ampli-
fier Unit was started.
Comments
Comments
OK is displayed for nor-
mal status.