Gpu Dvi-Dual Link Connector (J8); Usb0/1 Connectors (J10/ J9); Usb2/3 Connectors (J11/ J12) - GE IPN250RTM Hardware Reference Manual

Publication No. IPN250RTM-HRM/2

2.4.4 GPU DVI-Dual Link Connector (J8)

LINK
See the DVI/HDMI Selection section
The IPN250RTM supports Dual Link DVI‐I from one of the GPU heads on the
IPN250. This connector can be used for Single Link DVI, Dual Link DVI or analog
VGA RGB, all from the same head of the GPU. Only one format is active at a time
and is determined by the GPU, depending on the type of monitor connected to
this connector.
Table 2-14 IPN250RTMB J8 Pin Assignments
Pin Signal Pin
b
1 9
DVI_DL_TX2N
b
2 10
DVI_DL_TX2P
3 11
GND
b
4 12
DVI_DL_TX4N
b
5 13
DVI_DL_TX4P
6 DDC1_CLOCK 14
7 15
DDC1_DATA
8 16
VGA1_VSYNC
a. Routed over Quiet GND.
b. 90  differential pairs.
GEIP offers cable C‐CBL000224‐001, which is a 2m long StarTech DVIIDMM6
DVI‐I dual link cable with male connectors.

2.4.5 USB0/1 Connectors (J10/ J9)

Table 2-1 IPN250RTMA J10, J9 Connector Pin Assignments
J10 Pin Signal
1 P5V_USBP0
2 USB0_DN
3 USB0_DP
4 GND
The signal pairs are 90  differential.

2.4.6 USB2/3 Connectors (J11/ J12)

Table 2-1 IPN250RTMA J11, J12 Connector Pin Assignments
J11 Pin Signal
1 P5V_USBP2
2 USB2_DN
3 USB2_DP
4 GND
The signal pairs are 90  differential.
for further information.
Signal Pin Signal
b
17
DVI_DL_TX1N DVI_DL_TX0N
b
18
DVI_DL_TX1P DVI_DL_TX0P
19
GND GND
b
20
DVI_DL_TX3N DVI_DL_TX5N
b
21
DVI_DL_TX3P DVI_DL_TX5P
DDC1_5V 22 GND
23
Quiet GND DVI_DL_CLKP
24
HOTPLUG1 DVI_DL_CLKN
J9 Pin Signal
1 P5V_USBP1
2 USB1_DN
3 USB1_DP
4 GND
J12 Pin Signal
1 P5V_USBP3
2 USB3_DN
3 USB3_DP
4 GND
Pin Signal
b
A1
VGA1_GREEN
b a
A2
VGA1_RED
a
A3
VGA1_BLUE
b
A4
VGA1_HSYNC
b
SH1
Quiet GND
b
b
Connectors 23