Connectors; Power Connector Pin-Out; Ethernet - GE QuickPanel+ IC754VSI12CTD User Manual

4.6 Connectors

Power Connector Pin-out

4.6.1
Interface: 24VDC IN
Connector: Terminal Euro (Tyco Electronics 284539-3 or equivalent)
Mating Connector: (Tyco Electronics 284510-3 or equivalent)
To connect the power supply, refer to 2.3.1 "Connecting Input Power."

Ethernet

4.6.2
The QuickPanel+ is equipped with one 10BaseT/100-BaseTX Ethernet port. You can connect
an Ethernet network cable (unshielded, twisted pair, UTP CAT 5) to the unit via the RJ-45
connector on the bottom of the enclosure. LED indicators on the port indicate channel status
(see "Ethernet Port LED Operation" on page 11). The port can be accessed by Windows
Embedded Compact 7 network communications or by your application.
Ethernet Port Details
Interface: Ethernet 10BASE-T/100BASE-TX
4.6.2.1 Setting an IP Address
The QuickPanel+ provides two methods for setting an IP address:
GFK-2847
Pin Signal
Number Name
1 TX +
2 TX-
3 RX +
4 NC
5 NC
6 RX-
7 NC
8 NC
QuickPanel+ User's Manual–November 2013
Connector: RJ-45
Pin-out
Yellow
8
Chapter 4. Installation
Green
1
25