Resetting User Menu Settings To The Standard Settings; Setting The Status Display On The Viewfinder Screen And The Lcd Monitor; Selecting The Display Items; Display Modes And Setting Change - Sony DSR-400K/400PK Operating Instructions Manual

The previous screen appears again.
4
Turn the MENU knob to move b to the position to
where you want to move the page selected in step 2,
and press the MENU knob.
The page selected in step 2 is moved to the position
selected in step 4.
Resetting USER menu settings to
the standard settings
You can return all settings in the USER menu to the
standard settings.
1
Display the USER FILE page of the FILE menu.
For details on menu operations, see "Basic menu
operations" on page 94.
?F01 USER FILE
USER FILE LOAD :
USER FILE SAVE :
F.ID : sssssssssssssssss
USER PRESET :
2
Press the MENU knob. Then turn the MENU knob to
move b to USER PRESET, and press the MENU knob
again.
The message "PRESET OK? YES b NO" appears.
F01 USER FILE
PRESET OK? YES NO
USER FILE LOAD :
USER FILE SAVE :
F.ID : sssssssssssssssss
USER PRESET :
3
Turn the MENU knob to move b to YES, and press the
MENU knob.
The settings for all items in the USER menu are reset
to the standard settings.
TOP
EXEC
EXEC
EXEC
EXEC
EXEC
EXEC
Setting the Status Display
on the Viewfinder Screen
and the LCD Monitor
This section explains the menu settings for the display of
the viewfinder screen. These settings are also used for the
display of the LCD monitor in the same way.

Selecting the display items

To select the items to be displayed on the viewfinder
screen and the LCD monitor from the VF DISP 1 and VF
DISP 2 pages of the OPERATION menu, turn on or off the
indication next to each item.
1
Display the VF DISP 1 or VF DISP 2 page of the
OPERATION menu.
For details on menu operations, see "Basic menu
operations" on page 94.
You can select the following items to be displayed on
the screen on the VF DISP 1 and VF DISP 2 pages.
VF DISP 1 page
Item Description
VF DISP Turns on or off the viewfinder
screen.
VF DISP MODE
Selects the display mode.
DISP EXTENDER Displays extender.
DISP FILTER Displays types of the ND filter.
DISP WHITE Displays selected white balance
memory.
DISP GAIN Displays gain value.
DISP SHUTTER Displays shutter speed and ECS
mode.
DISP AUDIO Displays audio level.
DISP TAPE Displays remaining tape capacity.
DISP IRIS Displays iris opening.
1) The viewfinder screen can be also turned on or off by using the
DISPLAY switch of the viewfinder.
When you turn off the power of the camcorder and then turn it on, the
setting of the DISPLAY switch of the viewfinder has a priority over
the menu setting. Thus, turning on or off of the viewfinder screen
depends on the setting of the DISPLAY switch of the viewfinder.
2) For detailed information on the display mode, see "Display modes
and setting change confirmation/adjustment progress messages" on
page 100.

Setting the Status Display on the Viewfinder Screen and the LCD Monitor

1)
2)
99