Table of Contents
Advertisement
Function
Description
ATW
Assigns the ON/OFF function
of auto tracing white balance.
RETURN
Assigns the ON/OFF function
VIDEO
to display the image of the
return video signal on the
viewfinder to the switch.
LENS RET
Assigns the same function as
that of the RET button on the
lens and other functions to the
switch.
REC SWITCH Assigns the recording start/
stop function to the switch.
TURBO
Assigns the turbo gain
SWITCH
function to the switch.
ZEBRA
Assigns the zebra pattern
display function to the switch.
ZOOM TELE/
When using a lens that
d)
WIDE
supports serial
communications, assign the
ZOOM TELE setting to
ASSIGN 3, and the WIDE
setting to ASSIGN 4.
ZOOM WIDE/
When using a lens that
d)
TELE
supports serial
communications, assign the
ZOOM WIDE setting to
ASSIGN 3, and the TELE
setting to ASSIGN 4.
PB MIX
Function to mix playback and
camera video.
CC 5600K
Applies an electrical 5600K
filter.
FOCUS MAG Assigns the function that
magnifies the central part of
the viewfinder picture, for
easier focus adjustment. (This
function does not affect
recorded video or other signal
output.)
DIGITAL
Assigns the function that
e)
EXTENDER
electronically magnifies the
central part of the picture. (All
video output is magnified,
including recorded video.)
UA01 to
Assigns the items assigned in
f)
UA10
the ASSIGN SEL menu.
a) Even when the MARKER item is set to OFF on
the MARKER 1 page of the USER menu, these
switches allow you to display or not to display all
markers.
b) This function cannot be assigned to the RET
button on the lens.
c) Even if the RETURN VIDEO item is set to OFF
on the ASSIGNABLE SW page of the
OPERATION menu, you can use this switch to
display the image of the return video signal on
the viewfinder.
d) Only the Assign 3 SEL and Assign 4 SEL screens
appear.
c)
e) Video momentarily becomes black and audio is
momentarily muted when the digital extender is
switched on and off.
f) This does not appear if nothing is assigned in the
Assign menu.
Functions to be assigned to the ASSIGN 2
(slide-type) switch
Function
OFF
FRONT MIC
MONO/
STEREO
PICTURE
CACHE
ON/OFF
SUPER
(VFDISP&ME
NU)
MARKER
ZEBRA
DIGITAL
EXTENDER
UA01 to
c)
UA10
a) Even when the MARKER item is set to OFF on
the MARKER page of the USER menu, the
ASSIGN 2 switch allows you to display or not to
display all markers.
Adjustments and Settings From Menus
Content
Assigns no function.
Assigns the function that
switches between stereo and
monaural when a stereo
microphone is connected.
Assigns execution of
recording in picture cache
mode.
Assigns the function of a
switch to select mixing or no
mixing of superimposed
viewfinder and menu text data
into the video signals output
from the HD/SD SDI OUT or
TEST OUT connector, when
HD/SD SDI SUPER or TEST
OUT SUPER on the
OUTPUT 1 page of the
OPERATION menu are set to
ON.
Assigns the ON/OFF function
a)
to display all markers.
Assigns the zebra pattern
display function to the switch.
Assigns the function that
b)
electronically magnifies the
central part of the picture.
(All video output is
magnified, including
recorded video.)
Assigns the items assigned in
the ASSIGN SEL menu.
133
Advertisement
Table of Contents
