Table of Contents
Advertisement
ON/SEL: Each time this switch is pushed
upward, a window to confirm the menu
settings and status of the camcorder appears
on the viewfinder screen. The window
consists of four pages, which are switched
each time the switch is pushed upward. Each
page is displayed for about 10 seconds.
OFF: To clear the page after display, push this
switch down to the OFF position.
You can select the pages to be displayed on the
menu.
For details, see "Displaying the status confirmation
screens" on page 130.
k MENU ON/OFF switch
To use this switch, open the cover.
This switch is used to display the menu on the
viewfinder screen or the test signal screen.
Closing the cover automatically sets this switch to
OFF.
ON: Displays the menu on the viewfinder screen
or the test signal screen.
OFF: Removes the menu from the viewfinder
screen or the test signal screen.
For details, see "Menu Operations" (page 113).
l CANCEL/PRST (preset)/ESCAPE
switch
To enable this switch, set the MENU ON/OFF
switch to ON.
Closing the cover automatically sets the MENU
ON/OFF switch to OFF.
CANCEL/PRST: Flicking this switch up to this
position displays the message to confirm
whether the previous settings are cancelled or
settings are reset to their initial values,
depending on the menu operating condition.
Flicking this switch up to this position again
cancels the previous settings or resets the
settings to their initial values.
ESCAPE: Use this switch when the menu page,
which has a hierarchical structure, is opened.
Each time the switch is flicked to this
position, the page returns to one stage higher
in the hierarchy.
m "Memory Stick" compartment
"Memory Stick" Access indicator
Open the lid of the menu operating section, and
insert a "Memory Stick", with the notch facing
downward, in the direction shown by the arrow,
so that it clicks into place.
To remove a "Memory Stick", first press it in to
release the lock, then withdraw.
The "Memory Stick" access indicator lights in
green when a "Memory Stick" is loaded, and
lights in red when the "Memory Stick" is being
accessed for reading or writing.
For details about "Memory Stick", see "Handling
the "Memory Stick"" on page 138.
n Cover
Locations and Functions of Parts and Controls
Label
13
Advertisement
Table of Contents
