U-Line H-9180 Manual page 4

10. Connect the power for the control box (5) using
the power cord (8). Connect the programmable
handset (6) and lifting column cables into the
control box. (See Figure 8)
5
8
Figure 8
11. Position loose cords underneath the cable
management trays (7). Attach the cable
management trays to the adjustable frame using
eight M6 x 15 mm machine screws (10). Tighten
using 4 mm hex wrench. (See Figure 9)
Figure 9
PAGE 4 OF 18
ASSEMBLY CONTINUED
5
6
Lifting Column
Cable
10
7
12. Align holes on modesty panel brackets (14) with holes
on outer edge of metal modesty panel (13). Attach
using two M6 x 12 mm machine screws (12) per bracket.
Tighten using 4 mm hex wrench. (See Figure 10)
Figure 10
12
13
13. Position metal modesty panel (13) centered
between frame on back of desktop. Attach modesty
panel brackets (14) using two 5 x 20 mm wood
screws (11) per bracket. (See Figure 11)
Figure 11
11
14
14. Desk is now fully assembled. Using two people,
carefully flip the desk onto the feet.
15. Plug power cord into outlet. Follow operation
instructions to initialize the desk prior to first use.
14
13
1022 IH-9179