Qlima S-54 Series Operating Manual page 42

7. MODE - Scrolls through operation modes as follows: AUTO > COOL > DRY > HEAT > FAN. NOTE: HEAT
mode is not supported by the cooling only appliance.
8. SLEEP - Saves energy during sleeping hours.
9. OK - Used to confirm the selected functions.
10. TIMER - Set timer to turn unit on or off.
11. SHORTCUT - Used to restore the current settings or resume previous settings.
12. CLEAN - Used to start/stop the Self Clean function.
13. LED - Turns indoor unit's LED display and air conditioner buzzer on and off (model dependent), which
create a comfortable and quiet environment.
14. TURBO - Enables unit to reach preset temperature in shortest possible time.
Names and Functions of indicators on Remote Controller
Information are displayed when the remote controller is power up.
1.
2. Transmission Indicator - Lights up when remote sends signal to indoor unit.
3.
4. FAN SPEED display - Displays selected fan speed:
LOW -
MED -
HIGH -
AUTO
This fanspeed can not be adjusted in AUTO or DRY mode.
5. MODE display - Displays the current mode including: AUTO > COOL > DRY > HEAT > FAN.
6. ECO display (some units) - Displays when ECO feature is activated.
7. LOCK display - Displays when LOCK feature is activated.
8. Temperature/Timer/Fan speed display - Displays the set temperature by default, or fan speed or timer
setting when using TIMER ON/OFF functions.
• Temperature range: 17-30°C/62-86°F (20-28°C) (Model dependent)
• Timer setting range: 0-24 hours
This display is blank when operating in FAN mode.
GB
42
Q_man_S(C)46xx-S(C)54xx–S(C)JAxx22 SCAN ('21) V1.indd 42 Q_man_S(C)46xx-S(C)54xx–S(C)JAxx22 SCAN ('21) V1.indd 42
Fresh feature display. (some units) (No displays when Fresh feature is activated)
Sleep mode display.
Follow me feature display.
Wireless control feature display.
Low battery detection display (if flashes).
TIMER ON display.
TIMER OFF display.
Silence feature display.
02-11-2021 11:32 02-11-2021 11:32