New Holland TC5040 Operator's Manual page 180

Manual adjustable deflector plates (if installed)
To adjust, proceed as follows:
On both sides:
1. Loosen the knob (1).
2. Move the handle (2).
moving the handle to the outside = wider spread
pattern
Moving the handle to the inside = narrow spread
pattern
3. After adjusting fix with the knob (1).
Remote adjustable deflector plates (if installed)
With the chopper spreader rocker switches in the cab
it is possible to move electrically the spreader plates
of the spreader chute from left to the right and from
right to the left, depending on the wind direction and
side slope.
3−78
SECTION 3 − FIELD AND SITE OPERATION
159
160