Rear Case And Evf Unit; Hand Strap; Lmf-H/M/L Circuit Board And L Cover - Hitachi DZ-HS303A Service Manual

Disassembly and Reassembly > Disassembly

(8) Rear Case and EVF Unit

1) Pull out the EVF unit (b) in the direction of
the arrow.
2) Remove the eye cup (c) in the direction of the
arrow.
3) Remove the screw [A].

(9) Hand Strap

1) Remove the two screws [D].
2) Remove the screw [D], taking care because
the spring (c) of battery release button (b)
may pop out.
3) Remove the hand strap (a) in the direction of
the arrow, and then pull out the pin (d).

(10) LMF-H/M/L Circuit Board and L cover

1) Remove the LMF-H/M/L circuit board (a) in
the direction of the arrow.
2) Remove the four screws [G].
(a) LMF-H/M/L circuit board
(b) L cover
(c) L case unit
(a) Rear case
(b) EVF unit
(c) Eye cup
[A] M1.7×4 (Silver)
(b)
(a) Hand strap
(b) Battery release button
(c) Spring
(d) Pin
[D] M1.7×4 (Black)
(a)
3)
1) [D]
[G] M1.7×4 (Silver)
(b)
(c)
Fig. 5-3-10
5 - 9
(c)
2)
1)
(a)
Fig. 5-3-8
(b)
(c)
2) [D]
3) (d)
Fig. 5-3-9
2) [G]
1)
(a)
3) [A]