Hitachi DZ-HS303A Service Manual page 55

Troubleshooting > Checking Versions of Firmware and Updating
screen will appear.
6) When all required updating is complete, the screen for verifying the version of updated fi rmware
will appear, and the updated fi rmware will be displayed in red.
Make sure that the fi rmware has been updated to agree with the details specifi ed by the technical
bulletin, etc.
7) To complete updating, set the power switch to "OFF", and then remove the disc/card for updating.
Updating Start Screen
Firmware Update
Start Firmware update.
Camera Update Screen
Firmware Update
Updating camera.
Do not turn off power.
Updating Completed Screen
Firmware Update
Firmware updated.
Unmatched Screen
Firmware Update
This disc is not an update
disc for this camera.
System Update Screen
Firmware Update
Updating system.
Do not turn off power.
Drive (Main) Update Screen
Firmware Update
Updating drive (Main)
Please wait about 1 minutes.
Do not turn off power.
Screen of Verifying the Version
Firmware Update
Model
System
Loader
Camera
Drive (Main) : xxxx.xx.xx.REV
Drive (Core) : xxxx.xx.xx.REV
Turn off power
Same Version Screen
Firmware Update
Same revision.
Cannot update.
Fig. 4-4-2 Example of Display on Updating Firmware
4 - 22
Firmware Update
Firmware Update
: DZ-xxxxxx
: x.xxH
: x.xxH
: x.xxH (xx)
Loader Update Screen
Updating Loader.
Do not turn off power.
Drive (Core) Update Screen
Updating drive (Core)
Please wait about 1 minutes.
Do not turn off power.