System Reset Procedure - Hitachi DZ-HS303A Service Manual

Troubleshooting > System Resetting/Resetting Camera Functions
System
Item
reset
Date Set Yes
Date Mode Yes
LCD Yes
Brightness
EVF Yes
Brightness
Color Level Yes
EVF Display Yes
Beep Yes
Power Save Yes
Record LED Yes
Language Yes
Demo Mode Yes

4-7-2 System reset procedure

Note:
1) Always perform system reset after completing repair: System
reset will erase all error codes stored in fl ash memory.
2) Remove the DVD before executing system reset: Executing
system reset with a +RW loaded may erase the recorded data.
1) Set the power switch to "OFF", and then disconnect the battery
or AC adapter/charger.
2) Use a fi ne tipped pen, etc. to push the RESET button.
Camera
Default at
function
factory
reset
Date Setup
No 1/1/2006
0:00 AM
Yes M/D/Y 5:00PM M/D/Y,
17:00 D/M/Y,
PM5:00 Y/M/D
LCD/EVF Setup
Yes Center
Yes Center
Yes Center
Yes Auto Auto, On
Initial Setup
Yes On On, Off
Yes Off On, Off
Yes On On, Off
Yes English English, French,Spanish,
German, Italian
Yes Auto Auto, Off, Start
4 - 42
Setting range
-----------------
Fig 4-7-2 Reset switch position
Remarks Memo