Cognivue Remote Application - Cognivue Thrive User Manual

Thrive User Manual
the 'Save' Button, a window appears to notify you that the change was saved to the device. Click the
'OK' button to continue.
If you wish to disable the automatic report and data removal, then set the days to 0 and/or uncheck the
Enable Automatic Data Removal checkbox.

9.0 Cognivue Remote Application

Cognivue Remote application is a desktop application that allows you to manage your Cognivue Thrive
devices remotely. You can enter new patients, run tests and view reports on each Cognivue Thrive
device connected to your local network from your computer.
Once you have installed the Remote application, you also need to have an active user account on the
Cognivue Thrive devices you want to manage (see section 5 for setting up user accounts). When you run
the Remote application, a window will be displayed listing the available Cognivue Thrive device on your
local network.
Available Cognivue Devices window
If the device you want to use is listed, select it and click the 'Connect' button. If the device is not
available and needs to be connected, click the 'Add Device' button. Enter the name for that device, it's
IP Address and, click the 'Save & Connect' button.
When you have successfully connected to an available Cognivue Thrive device, the login window will
appear. At this point you can run a test and view reports just as you normally would from Cognivue
Thrive (see sections 7 and 8); a user account with the Operator role is able to view reports here. The
Remote application also allows to save test reports to your local computer. You can use this application
to access, save and print reports.
© 2020 Cognivue, Inc. UM-420-B Page 18