GROUP 6: Accessories and Rack Adapters; GROUP 7: Scan Converters and Scalers; and GROUP 8: Cables and Connectors 2 High-Definition Multimedia Interface 3 Download up-to-date Kramer user manuals from the Internet at this URL: http://www.kramerelectronics.com 4 The complete list of Kramer cables is on our Web site at http://www.kramerelectronics.com Introduction , which are clearly defined by function.
Overview The high quality VM-2HDMI accepts an HDMI input and distributes the signal to two outputs. In particular, the VM-2HDMI: Supports up to 1.65Gbps bandwidth per graphic channel Can read and store, in non-volatile memory of the output display devices, so it can then provide the EDID information to...
The Extended Display Identification Data (EDID provided by a display, to describe its capabilities to a graphics card (that is connected to the display’s source). The EDID enables the VM-2HDMI to “know” what kind of monitor is connected to the output. The EDID includes the manufacturer’s name, the product type, the timing data supported by the...
Figure 1: VM-2HDMI 1:2 HDMI Distributor Figure 2 and Table 1 define the top side panel: Figure 2: VM-2HDMI 1:2 HDMI Distributor (Top Side Panel) Table 1: VM-2HDMI 1:2 HDMI Distributor (Top Side Panel) Features Feature HDMI IN HDMI OUT1 Connects to the HDMI acceptor 1...
Your VM-2HDMI 1:2 HDMI Distributor Table 2: VM-2HDMI 1:2 HDMI Distributor (Lower Side Panel) Features Feature Function INPUT LED Blinks when the stored EDID does not match the display device EDID; illuminates when the EDID corresponds to the display device and that HDMI source is active OUT2 LED Blinks during the EDID setup;...
(see section 5.2). Figure 4: Connecting a VM-2HDMI 1:2 HDMI Distributor 1 Switch OFF the power on each device before connecting it to your VM-2HDMI. After connecting your VM-2HDMI, switch on its power and then switch on the power on each device...
OUT1 connector, press the EDID button when the OUT1 LED is on OUT2 connector, press the EDID button when the OUT2 LED is on In either case, the VM-2HDMI copies the EDID from the display. If no display is connected to the selected HDMI output, the default EDID will be chosen.
2 Environmental Specifications: Operating temperature: –10°C to 50°C; storage temperature: –30°C to 60°C 3 Some units may be housed in smaller enclosures: 12cm x 7.15cm x 2.76cm (4.7" x 2.8" x 1.08"), W, D, H Technical Specifications of the VM-2HDMI: of the VM-2HDMI KRAMER: SIMPLE CREATIVE TECHNOLOGY...
Page 11
EXCLUSION OF DAMAGES The liability of Kramer for any effective products is limited to the repair or replacement of the product at our option. Kramer shall not be liable for: Damage to other property caused by defects in this product, damages based upon inconvenience, loss of use of the product, loss of time, commercial loss;...
Page 12
For the latest information on our products and a list of Kramer distributors, visit our Web site: www.kramerelectronics.com, where updates to this user manual may be found. We welcome your questions, comments and feedback. Safety Warning: Disconnect the unit from the power supply before opening/servicing.
Need help?
Do you have a question about the DigiTOOLS VM-2HDMI and is the answer not in the manual?
Questions and answers