Pepperl+Fuchs POWERSCAN PSCAN-D-1 Series Manual page 64

POWERSCAN
Configuration PSCAN-D-1*
SELECT EAN/UPC PREFIXES
Note!
When scanning the following codes, barcodes starting with the selected prefixes will be
read and transmitted only if the ADD ON is present. If no ADD on is found, the barcode will
not be read. Barcodes starting with different characters are read regardless of ADD ON
presence and transmitted always without ADD ON.
Enter configuration
Cancel all selections (*)
select one or more of the following prefixes:
378/379
414/419
978
The commands above are not mutually exclusive. They can be used to configure more
than one set of prefixes simultaneously.
64
Exit and save configuration
434/439
977
979