Reads Per Cycle; Safety Time - Pepperl+Fuchs POWERSCAN PSCAN-D-1 Series Manual

POWERSCAN
Configuration PSCAN-D-1*
4.7.6

Reads per cycle

Enter configuration
Reads per cycle
One read per cycle (*)
See chapter 5.2
4.7.7

Safety Time

Enter configuration
Safety Time
Default Safety time 0.5 sec. (*)
Safety Time
Limitssamecode consecutive reading.
See chapter 5.2
52
Exit and save configuration
Multiple reads per cycle
Exit and save configuration
Read 2 numbers in the range 00-99:
00 = no same code consecutive reading
until reader is removed (no decoding) for at
least 400 ms.
01 - 99 = Timeout from 0.1 to 9.9 seconds
before a consecutive read on same code.