Table of Contents
Advertisement
Quick Links
OPERATOR'S MANUAL
MODEL #82001I-DF (EU)
2000W Dual Fuel Inverter Generator
Patent Pending
ENGLISH
READ AND SAVE THIS MANUAL. This manual contains important safety precautions which should be read and understood before operating the product.
Failure to do so could result in serious injury. This manual should remain with the product.
Specifications, descriptions and illustrations in this manual are as accurate as known at the time of publication, but are subject to change without notice.
This product is rated in accordance with PGMA (Portable Generator Manufacturers' Association) standard PGMA G300 (Standard for Testing and Validating
Performance of Portable Generators).
Made in China - REV 20220608
Champion Power Equipment, Inc., Santa Fe Springs, CA USA
Advertisement
Table of Contents
Related Manuals for Champion Global Power Equipment 82001I-DF
Summary of Contents for Champion Global Power Equipment 82001I-DF
- Page 1 OPERATOR'S MANUAL MODEL #82001I-DF (EU) 2000W Dual Fuel Inverter Generator Patent Pending ENGLISH READ AND SAVE THIS MANUAL. This manual contains important safety precautions which should be read and understood before operating the product. Failure to do so could result in serious injury. This manual should remain with the product.
-
Page 2: Safety Definitions
NTRODUcTION 82001i-DF (EU) NTRODUcTION SAFETY DEFINITIONS Congratulations on purchasing your invertor generator. Please The purpose of safety symbols is to attract your attention to follow these instructions and maintain it correctly. possible dangers. The safety symbols, and their explanations, deserve your careful attention and understanding. The safety warnings do not by themselves eliminate any danger. -
Page 3: Important Safety Instructions
IMPORTANT SAFETY INSTRUcTIONS 82001i-DF (EU) IMPORTANT SAFETY INSTRUcTIONS WARNING Operation of this equipment may create sparks that can DANGER start fires around dry vegetation. Generator exhaust contains carbon monoxide, a colorless, A spark arrestor may be required. The operator should odorless, poison gas. - Page 4 IMPORTANT SAFETY INSTRUcTIONS 82001i-DF (EU) WARNING cAUTION Running engines produce heat. Severe burns can occur on Improper treatment or use of the generator can damage it, contact. Combustible material can catch fire on contact. shorten its life and void your warranty.
-
Page 5: Fuel Safety
IMPORTANT SAFETY INSTRUcTIONS 82001i-DF (EU) Fuel Safety DO NOT pump gasoline directly into the generator at the gas station. Use an approved container to transfer the fuel to the generator. DANGER DO NOT overfill the gasoline tank. GASOLINE, GASOLINE VAPORS AND PROPANE (LPG) ARE HIGHLY FLAMMABLE AND EXPLOSIVE. -
Page 6: Power Panel
IMPORTANT SAFETY INSTRUcTIONS 82001i-DF (EU) Power Panel 100% 00:00 REMAINING 1. Power Output – Percentage of available power from 5. LED Display generator being used. 5a. Flashing Blue – Total run time (first 5 seconds after 2. Maintenance Indicator unit started). -
Page 7: Outlet Panel
IMPORTANT SAFETY INSTRUcTIONS 82001i-DF (EU) Outlet Panel 1. Circuit Breakers (Push Reset) – Protects the generator RECEPTACLES against electrical overloads. 12V DC, 8 Amp (Automotive) 2. Ground Terminal – Consult an electrician for local May be used to supply electrical power for grounding regulations. - Page 8 ASSEMBLY 82001i-DF (EU) ASSEMBLY This unit ships from our factory without oil. It must be properly serviced with fuel and oil before operation. If you have any questions regarding the assembly of your generator, call all our your nearest Champion Distributor.
- Page 9 ASSEMBLY 82001i-DF (EU) cAUTION NOTIcE Use regular unleaded gasoline with a minimum octane The first 5 hours of run time are the break-in period for the rating of 85 and an ethanol content of 10% or less by unit. During the break in period stay at or below 50% of the volume.
-
Page 10: Add Fuel: Propane (Lpg)
ASSEMBLY 82001i-DF (EU) Add Fuel: Propane (LPG) cAUTION 1. Confirm the EZ Start dial is in the OFF position. Do not allow children to tamper or play with the LPG cylinder 2. If using a new propane cylinder, remove the plastic cap or hose connections. -
Page 11: Operation
OPERATION 82001i-DF (EU) OPERATION Grounding A ground terminal connected to the frame of the generator has Generator Location been provided (see Controls and Features for terminal location). Neutral Floating* NEVER operate the generator inside any building, including garages, basements, crawlspaces and sheds, enclosure or –... - Page 12 OPERATION 82001i-DF (EU) 4. Turn EZ Start dial clockwise to the full CHOKE position. NOTIcE For gas starting in cold ambient <15°C (59°F): The choke must be in 100% of the “CHOKE” position for recoil start procedures. Do not over-choke. As soon as the engine starts, turn the EZ Start dial to the RUN position.
-
Page 13: Connecting Electrical Loads
OPERATION 82001i-DF (EU) connecting Electrical Loads 6. Move the EZ Start dial to the “RUN” position. Let the engine stabilize and warm up for a few minutes after starting. Plug in and turn on the desired 220 or 240 (if applicable) Volt AC single phase, 50 Hz electrical loads. -
Page 14: Eco (Economy) Mode
OPERATION 82001i-DF (EU) 12V Dc Automotive Style Outlet Power Management Use the following formula to convert voltage and amperage to The 12V DC outlet(s) can be used with the supplied accessories watts: and other commercially available 12V DC automotive style plugs. -
Page 15: Maintenance
MAINTENANcE 82001i-DF (EU) Parallel Operation The Champion model 82001i-DF (EU) is parallel ready and can be operated in parallel with another Champion unit to increase the total available electrical power. A Champion model 100468 parallel kit (optional equipment) is required for parallel operation. -
Page 16: Cleaning The Generator
MAINTENANcE 82001i-DF (EU) cleaning the Generator NOTIcE cAUTION Once oil has been added, a visual check should show oil about 1-2 threads from running out of the fill hole. If using DO NOT spray engine with water. the dipstick to check oil level, DO NOT screw in the dipstick while checking. - Page 17 MAINTENANcE 82001i-DF (EU) cleaning the Air Filter 6. Replace the spark arrestor if it is damaged. 7. Position the spark arrestor on the muffler and attach by reversing the steps from above. 1. Remove the maintenance cover. cAUTION 2. Locate the air filter plastic cover. Remove the screw using a Phillips head screwdriver.
-
Page 18: Adjusting The Governor
MAINTENANcE 82001i-DF (EU) Adjusting the Governor 2. Move the round copper cover plate and remove the battery cells. WARNING Tampering with the factory set governor will void your warranty. The air-fuel mixture is not adjustable. Tampering with the governor can damage your generator and your electrical devices and will void your warranty. -
Page 19: Long Term Storage (More Than 1 Year)
MAINTENANcE 82001i-DF (EU) STORAGE Long Term Storage (more than 1 year) For storage over 1 year, the gasoline tank and carburetor must DANGER be completely drained of gasoline. Gasoline and gasoline vapors are highly flammable and 1. Be sure all appliances are disconnected from generator. -
Page 20: Removing From Storage
MAINTENANcE 82001i-DF (EU) Removing from Storage If the generator has been improperly stored for a long period of time with gasoline in the gasoline tank and/or carburetor, all fuel must be drained and the carburetor must be thoroughly cleaned. This process involves technically advanced tasks. For assistance please call your nearest Champion distributor. -
Page 21: Specifications
SPEcIFIcATIONS 82001i-DF (EU) SPEcIFIcATIONS Fuel Specifications Use regular unleaded gasoline with a minimum octane rating of Generator Specifications 85 and an ethanol content of 10% or less by volume. DO NOT USE E15 or E85. DO NOT OVERFILL. Generator Model .. -
Page 22: Troubleshooting
TROUBLESHOOTING 82001i-DF (EU) TROUBLESHOOTING Problem Cause Solution No fuel. Add fuel. Faulty spark plug. Replace spark plug. Generator will not start. Unit loaded during start up. Remove load from unit. Fill crankcase to the proper level. Low oil level. Place generator on a flat, level surface. -
Page 23: Warranty
WARRANTY* 82001i-DF (EU) WARRANTY* warranty and is not required to be performed at a facility or by a person authorized by CPE. CHAMPION POWER EQUIPMENT 3 YEAR LIMITED WARRANTY Other Exclusions This warranty excludes: Warranty Qualifications – Cosmetic defects such as paint, decals, etc. -
Page 24: Parts Diagram
WARRANTY* 82001i-DF (EU) Parts Diagram... -
Page 25: Parts List
WARRANTY* 82001i-DF (EU) Parts List Part Number Description Qty. Part Number Description Qty. 36 1.819.0414.2 1.818.0514.3 Screw M5 × 14, Green Sunk Screw M4 × 14 37 62.210017.00 Multifunction Display 62.200200.00 Cover, Left, black Pipe, Indicator Light 38 88.070011.01 62.214000.00... - Page 26 WARRANTY* 82001i-DF (EU) Part Number Description Qty. 72 5.1050.000 Microswitch 73 1.819.1.0330 Sunk Screw M3 × 30 Tapping Screw 1.845.3513 ST3.5 × 13 75 2.06.048 Clamp Ø15.7 76 62.070012.00 Pipe 220 mm 77 2.06.019 Hose Clamp Ø15 Support, Inlet 78 62.070037.00 Connection 79 1.6170.03...
- Page 27 WARRANTY* 82001i-DF (EU) Engine Parts Diagram...
-
Page 28: Engine Parts List
WARRANTY* 82001i-DF (EU) Engine Parts List Part Number Description Qty. Part Number Description Qty. Rubber Sleeve, 39 62.130001.00 Insulator, Carburetor 62.190006.00 End Cover 40 81.130003.00 Gasket, Carburetor 1.5789.0512 Flange Bolt M5 × 12 62.130000.03 Carburetor Assembly 62.190002.01 Cover, End Housing 42 81.130004.00... - Page 29 WARRANTY* 82001i-DF (EU) Part Number Description Qty. 78 81.050301.02 Piston Ring, First 79 81.050003.00 Wrist Pin, Piston 80 2.09.007 Circlip Ø13.5 × Ø1 81 81.123000.01 Ignition Coil 82 81.080003.00 Air Duct 83 81.081001.00 Muffler Protector Seal 84 62.081100.00 Muffler Protector, Side 85 81.081003.00...
-
Page 30: Wiring Diagram
WARRANTY* 82001i-DF (EU) Wiring Diagram... - Page 31 champion Power Equipment Europe Service & Technical contacts United Kingdom: Germany: France: BPE Holdings BPE Solutions Deutschland GmbH BPE Solutions France SAS Unit 17-18 Altrottstraße 31 3 Boulevard de Belfort Bradley Hall Trading Estate D-69190 Walldorf 59000 Lille Bradley Lane, Standish Germany France Wigan, WN6 0XQ, UK...