Wireless Part Setting; Bluetooth Pairing Setting Code - IMAGO K-60 Instruction Manual

2 Wireless part setting

2.1 Bluetooth pairing setting code

（1）R&B4.0 wireless scanning gun is compatible with 2.4g, bluetooth BLE4.0
communication, the engine and host through TTL/RS232 communication docking, the
engine head communication mode needs to be set to serial communication (wireless
setting), baud rate is 15200bps (bluetooth setting).
TTL/RS232（Wireless Setting）
（2）2.4g communication was used when R&B4.0 wireless scanning gun was connected with the
supporting u-disk receiver; It can also be paired with any bluetooth mobile device. The pairing is
as follows：
①When the R&B scanner gun is connected to the matching u-disk receiver, plug in the
receiver, and when the blue light is flashing: scan the pairing code I and II for pairing:
The pairing code I
Disconnect
115200bps（Bluetooth Setting）
The pairing code II
2
connect