Lighting And Aiming; Lighting; Aiming - IMAGO K-60 Instruction Manual

4 Lighting and aiming

4.1 Lighting

Lighting for shooting photography to provide auxiliary lighting, beam exposure to the
reading target, to improve reading performance and adaptability to weak ambient light. The user
can set it to one of the following depending on the application environment:
Normal (default setting): The light is on when taking a picture, and off at other times.
Always: The light is on after the module is switched on.
No lighting :The lighting does not illuminate under any circumstances.
No lighting
4.2

Aiming

There is a projection device on the reading module, which is used to project a special figure
when shooting the reading module, and it represents the center of the scene image shot by the
reading module.When the reading module is used to shoot and read, the image is projected on
the reading target, and the reading module "aims" at the reading target, so that the required
target can be read out more easily.
Normal (default setting): The light is on when taking a picture, and off at other times.
Always: The light is on after the module is switched on.
No lighting :The lighting does not illuminate under any circumstances.
No lighting
*Normal
*Normal
12
Always
Always