Code Id; Add Code Id; Modify The Code Id - IMAGO K-60 Instruction Manual

5.6 Code ID

5.6.1 add Code ID

Users can use Code ID to identify different bar code types, and the Code ID corresponding to
each bar code type can be modified freely. The CodeID of all barcodes is 1 character, and must be
a letter, and cannot be set as a number, invisible character, or punctuation, etc.
Allow to add CODE ID
Read the following setting code to restore the Code ID of all barcode types to the default
value, please use it with caution.

5.6.2 Modify the CODE ID

The Code ID of each bar code type can be modified independently, and it needs to be used
by reading the corresponding setting code and combining it with the data code.
Example of modifying PDF417 Code ID to the letter 'p':
1. Look up the table and get the hexadecimal value corresponding to "p" is 70;
2. Read "Enable Setup Code";
3. Read the setting code of "Modify PDF417 Code ID";
4. Read the data code "7", "0";
5. Read "Save";
6. Read "Close Setting Code".
Modify the Code ID setting code list of each barcode type：
Modify
PDF417 Code ID
The default CODE ID for all bar codes
16
no allow to add CODE ID
*
Modify
Code128 Code ID