Ean-8; Restore Default Settings; Enable/Disable Ean-8; Output Verification - IMAGO K-60 Instruction Manual

6.4

EAN-8

6.4.1 Restore default settings

6.4.2 Enable/Disable EAN-8

*Enable EAN-8

6.4.3 Output verification

EAN-8 The barcode data is fixed to 8 bytes, of which the last byte is the checksum.
*Output check

6.4.4 Extension code

After setting to "Read 2-digit extension code" or "Read 5-digit extension code", the reader
module can read barcode symbols with extension codes, or barcode symbols without extension
codes. After setting to "Do not read 2-digit extension code" or "Do not read 5-digit extension
code", the extension code attached to the bar code symbol will not be read and output.
Disable 2-digit extension code
*Disable 5-digit extension code
EAN8 ( Defaulted)
Disable EAN-8
No output check
Enable 2-digit extension code
Enable 5-digit extension code
25