Data Segment Length Modification - IMAGO K-60 Instruction Manual

5.9.2 Data segment length modification

Modify the length of the Start section
It is necessary to read the corresponding setting code and use it in combination with the
data code. The length can be modified from 0-255.
Modify the length of the Start segment to 0x02, example:
1. The hexadecimal system of 0x02 is represented by the data code "0" and "2";
2. Read "Enable Setup Code";
3. Read the setting code of "Modify Start Segment Length";
4. Read the data code "0", "2";
5. Read "Save";
Modify the length of the End section
21