Data Editing; Comprehensive Settings; Increase Length Information Output; Start Character - IMAGO K-60 Instruction Manual

5.4 Data Editing

5.4.1 Comprehensive settings

For all "add" operations
The "add" operation refers to: start character, code ID addition, custom prefix information
addition, custom suffix information addition, and terminator addition. The following "Allow
all information to add" and "Prohibit all information to add" have an effect on the above
several functions at the same time.
➢
"Allow all information to be added": The start character, Code ID, prefix, suffix, end
character, etc. will be allowed to be added to the data output content.
➢
"Prohibit adding all information": The start character, Code ID, prefix, suffix, end
character, etc. will not be added to the data output content.
Allow all information to be added

5.4.2 Increase length information output

This configuration is suitable for non-keyboard interfaces. Before the device outputs data,
increase the length of two bytes, including all other information.
*Not output decoding length information

5.4.3 Start character

*No start character
Prohibit all information to be added
Output decoding length information
starting symbol STX
14