Trolling Motor Panel (Option) - Boston Whaler Montauk 190 Owner's Manual

Hide thumbs Also See for Montauk 190:
Table of Contents

Advertisement

Trolling Motor Panel (Option)

If equipped, the trolling motor receptacle is located
at the bow of the boat. The panel is wired for 12V &
24V and includes a 12V accessory receptacle. Your
boat has reinforced areas of the bow that will make
it easier to mount a trolling motor. The reinforced
sections are located on either side of the bow
navigation light and extend back along the gunwale.
The phenolic material can be drilled and tapped to
hold machine screws.
There are a variety of trolling motors and mounts
that can be fitted to your boat. See your Boston
Whaler
dealer or talk to a reputable trolling motor
®
dealer for the right type and size of trolling motor
and battery that will work best with your boat.
When looking for a trolling motor you will need to
know the distance from the top of the deck to the
waterline.
In addition to the trolling motor receptacle panel,
your boat will have a removable bow light (See
fig. 2.10.1) which replaces the standard bow light,
an additional battery boxes located in the console
Trolling Motor Panel (Option)
Fig. 2.18.1
1
1
REINFORCED BOW
2
TROLLING MOTOR PLUG
3
TROLLING MOTOR RECEPTACLE
4
12 VOLT ACCESSORY RECEPTACLE
2-18
Section 2 • General Information
3
2
4
Trolling motor (Option)
Fig. 2.18.2
interior, plus two (2) 40 amp breakers located on the
component board in the center console which can be
accessed through the door on the port side.
NOTICE
Refer to the Trolling Motor Owner's Manual for
the correct size and type of battery.
Refer to Section 4 • Electrical System, page 4-3 for
additional information regarding the trolling motor
electrical hookup.
WARNING
!
There is a risk of electrical shock. Always
have a qualified marine electrician install any
system upgrades that are not already installed
on your boat. There are a variety of wiring
configurations up to 36Volts. Incorrect wiring
will adversely affect your trolling motors
performance. Always use the correct circuit
protection and wire gauge when installing an
upgraded trolling motor wiring system.
REFER TO THE MANUFACTURER'S MANUAL IN
YOUR OWNER'S MANUAL PACKET FOR COMPLETE
INSTRUCTIONS AND WARRANTY.
R
190 Montauk

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents