Section 3 • Systems & Components Overview & Operation
• When engine starts,
release key. The key will
return to the "ON"
position.
Warming Up the Engine
The "THROTTLE ONLY" button on the gear shift/
throttle control allows the operator to increase engine
RPM for warm-up without shifting the engines into
gear.
• Be sure that the gear
shift and throttle
control handle is in the
NEUTRAL position.
•
Press and hold the
"THROTTLE ONLY"
button while moving
the control handle
ahead to the forward
position.
•
Advance the control
handle to increase
engine RPM.
NOTE: Engine RPM is limited to prevent engine
damage.
•
To disengage, return the
control handle back
to the neutral position.
The warm-up mode can be re-activated by turning
the engine off and re-starting.
190 Montauk
Stopping the Engine
•
Be sure that the gear
shift and throttle
control handle is in the
NEUTRAL position
•
Turn Key to the "OFF"
position.
•
Turn the battery switch
"OFF".
CAUTION
!
NEVER turn the battery switch to the "OFF"
position while the engine is running. Equipment
damage will occur.
R E F E R TO T H E E N G I N E M A N U FA C T U R E R'S
MANUAL IN YOUR OWNER'S MANUAL PACKET FOR
COMPLETE INSTRUCTIONS.
R
3-7