24V Trolling Motor Panel (Option) - Boston Whaler 230 dauntless User Manual

12V/24V Trolling Motor Panel (Option)
The 230 Dauntless can be equipped with an optional
trolling motor panel and wiring. This option is part
of the fi shing package which consists of:
• Trolling Motor Panel
• Two (2) Spare Battery Boxes,
(stored in the console).
• Two (2) 40 amp breakers (in the console).
• A 12V/24V plug w/12' extension cable.
• Reinforced Deck, (bow).
There are a variety of trolling motors and mounts that
can be fi tted to your boat. See your Boston Whaler
dealer or talk to a reputable trolling motor dealer for
the right type and size of trolling motor and battery
that will work best with your boat. There is a section
of the port bow that has been reinforced with Phenolic
(Figure 2.19.1) to allow for securing the trolling
Trolling Motor Panel (Option)
Fig. 2.19.1
1
1
REINFORCED BOW
2
TROLLING MOTOR POWER CORD
3
TROLLING MOTOR RECEPTACLE
4
12V ACCESSORY RECEPTACLE
230 Dauntless
Section 2 • General Information
3
2
4
!
There is a risk of electrical shock. Always have
a qualifi ed marine electrician install any system
upgrades that are not already installed on your
boat. There are a variety of wiring confi gurations
up to 36Volts. Incorrect wiring will adversly
affect your trolling motors performance. Always
use the correct circuit protection and wire gauge
when installing an upgraded trolling motor
wiring system.
NOTICE
The addition of the trolling motor receptacle
will delete the standard bow rail.
®
motor base. The phenolic material can be drilled and
tapped to hold machine screws. When looking for a
trolling motor you will need to know the distance
from the top of the deck to the waterline, (Figure
2.19.2).
There are two battery boxes that have been secured
in the console interior and can be accessed through
the door on the starboard side. The wiring from
the panel to the battery has been installed. See
your Boston Whaler
electrician to make fi nal connections to your trolling
motor panel.
See Section 4-Electrical, page 4-3 for wiring setup
for 12V/24V trolling motor electrical power.
Deck to Waterline Reference
Fig. 2.19.2
REFER TO THE MANUFACTURER'S MANUAL IN
YOUR OWNER'S MANUAL PACKET FOR COMPLETE
INSTRUCTIONS, INFORMATION AND WARRANTY.
R
WARNING
®
dealer or a qualifi ed marine
2' 4"
WATERLINE
2-19