❹ Menu Descriptions & Functions [Display Menu]; [Auto Pc Adj.]; [Fine Sync]; [H Position] - NEC PE506WL User Manual

❹ Menu Descriptions & Functions [Display menu]
Display
Auto PC adj.
Fine sync
H position
V position
H.size
Aspect
Orientation
Menu position
Background display
Signal format

[Auto PC adj.]

Select Auto PC Adj. function can adjust Fine sync, H position, V position , H. size to be compatible with the com-
puter automatically.
Press the MENU button on the remote control or on the top control panel to display the On-Screen menu.
Press ▲ ▼ button to select the Display menu, then press the ENTER or ▶ button.
1) Press ▲ ▼ button to select [Auto PC adj.] menu.
2) press the ENTER button.
NOTE:
• The projector will perform Auto PC adj. function automatically,when its signal is input for the first time.
• Auto PC adj. function may fail to work if computer models is not compatible with the input signal .
• Auto PC adj. function may fail to work if you select the following system signal format: 480i, 576i, 480p, 576p, 720p, 1080i,1080p, or
signals from the HDMI terminal.

[Fine sync]

(Only for PC signal input)
Adjust image to the best state When the image jitters, or the image outline dims.
1) Press ▲ ▼ button to select [Fine sync] menu.
2) Press the ENTER button.
3) Press ▲ ▼ button to adjust Fine sync.
Adjustment range is from 0 to +31. Please adjust to the least interference state.

[H position]

(Only for PC signal input)
On the premise that the relative position of both projector and the screen is set up right,you can move the image
horizontal position,if the position of the projected image on the screen is deviated.
1) Press ▲ ▼ button to select [H position] menu.
2) Press the ENTER button.
3) Press ▲ ▼ button to adjust image H position.
Adjustment range is from -5 to +5.
0
0
0
0
Normal
Front
Upper left
Blue
...
35
5. Using On-Screen Menu