Table of Contents
Advertisement
Connecting to a Wired LAN
The projector comes standard with a Ethernet/HDBaseT port (RJ-45) which provides a LAN connection using a LAN
cable.
To use a LAN connection, you are required to set the LAN on the projector menu. Select [SETUP] → [NETWORK
SETTINGS] → [WIRED LAN]. (→ page 107).
Example of LAN connection
Example of wired LAN connection
6. Installation and Connections
Server
Hub
LAN cable (not supplied)
NOTE: Use a Category 5 or higher LAN cable.
133
Ethernet/HDBaseT
Advertisement
Table of Contents
